Columbia Yukon Molybdenum Canada
Seite 10 von 23 Neuester Beitrag: 18.12.13 13:45 | ||||
| Eröffnet am: | 24.04.07 12:17 | von: Ohio | Anzahl Beiträge: | 563 |
| Neuester Beitrag: | 18.12.13 13:45 | von: drmiraculix | Leser gesamt: | 86.462 |
| Forum: | Hot-Stocks | Leser heute: | 53 | |
| Bewertet mit: |  | |||
| Seite: < 1 | ... | 7 | 8 | 9 | | 11 | 12 | 13 | ... 23 > | ||||
richtet Euere Blicke doch mal auf Papiere die Zukunft haben, und vergeudet Euere Gedanken nicht unnötig mit MF, der lacht Euch doch eh aus, hat selbst genügend Erfolg bislang gehabt und wenn jeder einfach etwas mitdenkt, dann kann er seine Verluste begrenzen und nimmt vorher seine Gewinne raus, doch die Gier ist der Freund der Verlierer, Grüße aus LE
Optionen
| Boardmail an "Geizkragen" |
Wertpapier: BC Molly |
Columbia Yukon Explorations Inc (2) (C:CYU)
Shares Issued 27,862,375
Last Close 7/4/2007 $1.43
Thursday July 05 2007 - News Release
Mr. Ronald Coombes reports
NI 43-101 REPORT VALIDATES HISTORICAL RESOURCE
Columbia Yukon Explorations Inc. has received a National Instrument 43-101 mineral resource estimate for its Storie property molybdenum deposit. The Storie deposit is situated in the Liard mining division, approximately six kilometres southwest of the town of Cassiar, B.C. Cassiar is 540 km from the port of Stewart, B.C., 125 km north of Dease Lake, B.C., and 137 km from the Alaska Highway west of Watson Lake, Yukon. Cassiar is 1,190 air kilometres from Vancouver.
In 1980, Shell Canada reported unclassified historical drill indicated reserves (alternatively drill indicated potential) of 100.5 million tonnes (Mt) grading 0.129 per cent MoS2 using a cut-off of 0.07 per cent MoS2. This is equivalent to 100.5 Mt grading 0.077 per cent Mo at a cut-off of 0.042 per cent Mo, a figure which has been reported in government and other technical documents since that time. This estimate predates NI 43-101 and is not compliant and should not be relied upon.
Watts Griffis and McOuat Ltd. (WGM), consulting geologist and engineer of Toronto, Ont., has prepared a mineral resource estimate for the Storie molybdenum deposit using 38 drill holes, primarily NQ (47.6-millimetre) diameter, from drilling programs completed in 1979, 1980 and 2006. Using a cut-off of 0.035 per cent Mo, a bulk rock density of 2.6 grams per cubic metre, a maximum open pit mining depth of 325 metres and an assumed 1.5 to 1 waste to "ore" stripping ratio, the Storie deposit has been estimated to contain an inferred mineral resource of 101.59 Mt grading 0.067 per cent Mo.
"WGM is of the opinion that a realistic drill hole spacing to upgrade the current mineral resources will likely be in the 50 m to 80 m range; however, this will require further detailed analysis after analytical data from more drill holes become available, and WGM will assess the drill spacing on an ongoing basis." The surface dimensions are slightly elongated with an east-west direction and, as currently defined by drilling, are approximately 700 m by 600 m. In generating the polygonal model, WGM noted that, although there is excellent evidence of continuous mineralization between drill holes, the thickness and grade vary even between drill holes less than 80 m apart.
Due to this variability and the current wide drill hole spacing, particularly between drill holes in the deeper north and west portions of the deposit, WGM has classified the mineral resource estimate as inferred at this time. The company anticipates that the planned 2007 infill drilling program, as recommended by WGM, will upgrade the resource classification.
WGM states that: "The Storie deposit warrants further work. The deposit is presently known to be open to the east, west and north, as well as at depth, and there are untested structures (the X fault) and molybdenum occurrences (M zone) which merit further investigation."
The X fault, a structure roughly parallel to the Crone fault, passes the southern edge of the Storie deposit in the area of the southernmost historic drill holes. No mention of the X fault is made in the two previous Shell Canada reports on the Storie deposit, but it may be significant since it appears to be in proximity to the M zone molybdenum occurrence. A third Shell Canada report had conflicting information of an intersection of 0.23 per cent MoS2 over 130 m and/or 0.23 per cent MoS2 over five m in one historical hole (M-2) at the M zone; only portions of the core were split and assayed.
Most recently, the company has completed the core drilling of nine holes to the east of the resource block and has extended the known zone of mineralization 125 m to the east (assays are currently pending). The company's previously reported 2007 drilling program of up to 40,000 metres continues, and the company will update results upon receipt and review of analyses.
The company's qualified person, John Kowalchuk, PGeo, has reviewed this release and is acting as the qualified person for this project.
NI 43-101 Report Validates Historical Resource
West Vancouver, British Columbia – July 5, 2007 – Columbia Yukon Explorations Inc. (the “Company”) is pleased to announce the receipt of a NI 43-101 Mineral Resource estimate for its “Storie” Property Molybdenum Deposit. The Storie Deposit is situated in the Liard Mining Division, approximately 6 km southwest of the Town of Cassiar, British Columbia. Cassiar is 540 km from the port of Stewart, British Columbia, 125 km north of Dease Lake, B.C., and 137 km from the Alaska Highway west of Watson Lake, Yukon Territory. Cassiar is 1,190 air kilometres from Vancouver.
In 1980, Shell Canada reported unclassified historical "drill indicated reserves" (alternatively "drill indicated potential") of 100.5 Mt grading 0.129% MoS2 using a cutoff of 0.07% MoS2. This is equivalent to 100.5 Mt grading 0.077% Mo at a cutoff of 0.042% Mo, a figure which has been reported in government and other technical documents since that time. This estimate pre-dates NI 43-101 and is not compliant and should not be relied upon.
Watts Griffis and McOuat Limited (“WGM”), Consulting Geologists and Engineers of Toronto, Ontario, has prepared a Mineral Resource estimate for the Storie Molybdenum Deposit using 38 drill holes, primarily NQ (47.6 mm) diameter, from drilling programs completed in 1979, 1980 and 2006. Using a cutoff of 0.035% Mo, a bulk rock density of 2.6 g/cm3, a maximum open pit mining depth of 325 metres and an assumed 1.5 to 1 waste to "ore" stripping ratio, the Storie Deposit has been estimated to contain an Inferred Mineral Resource of 101.59 Mt grading 0.067% Mo.
“WGM is of the opinion that a realistic drill hole spacing to upgrade the current Mineral Resources will likely be in the 50m to 80m range; however, this will require further detailed analysis after analytical data from more drill holes become available, and WGM will assess the drill spacing on an ongoing basis”. The surface dimensions are slightly elongated with an east-west direction and, as currently defined by drilling, are approximately 700m by 600m. In generating the polygonal model, WGM noted that, although there is excellent evidence of continuous mineralization between drill holes, the thickness and grade vary even between drill holes less than 80m apart.
Due to this variability and the current wide drill hole spacing, particularly between drill holes in the deeper north and west portions of the deposit, WGM has classified the Mineral Resource estimate as Inferred at this time. The Company anticipates that the planned 2007 infill-drilling program, as recommended by WGM, will upgrade the resource classification.
WGM states that, “The Storie Deposit warrants further work. The deposit is presently known to be open to the east, west and north, as well as at depth, and there are untested structures (the X Fault) and molybdenum occurrences (M Zone) which merit further investigation”
The “X Fault", a structure roughly parallel to the Crone Fault, passes the southern edge of the Storie Deposit in the area of the southernmost historic drill holes. No mention of the X Fault is made in the two previous Shell Canada reports on the Storie Deposit, but it may be significant since it appears to be in proximity to the “M Zone” molybdenum occurrence. A third Shell Canada report had conflicting information of an intersection of 0.23% MoS2 over 130m and/or 0.23% MoS2 over 5m in one historical hole (M-2) at the M Zone; only portions of the core were split and assayed.
Most recently, the Company has completed the core drilling of nine holes to the east of the resource block and has extended the known zone of mineralization 125m to the east (assays are currently pending). The Company’s previously reported 2007 drilling program of up to 40,000 metres continues, and the Company will update results upon receipt and review of analyses.
The Company’s Qualified Person, John Kowalchuk, P.Geo., has reviewed this release and is acting as the Qualified Person for this project.
For further information, contact Mr. Clive Shallow, investor communications at 604-922-2030 or visit the Company’s website at www.columbiayukon.com. A copy of the NI 43-101 Report will be available on Sedar and on the Company’s website.
Columbia Yukon Explorations Inc.
das ding war vorher sehr lange Zeit im die 50 cent!!
wird heute vo bä. meister ausfühlich
Beschiben und zum kauf empfohlen
Frage???????? wer glaubt auch das es eine Pusch
und zocker wert ist ??????????????????????
traue dem nicht mehr
VERMUTLICH HÄTTE ICH VORHER VERKAUFT
Optionen
| Boardmail an "koray" |
Wertpapier: BC Molly |
Aber glaube ja nicht, dass sich einer findet, der sich bei diesem Frick entschuldigt...
Laufe dem weiter hinterher...
Das Teil braucht keinen Fickpush! Du hast auch nichts gelernt...
mfg
Optionen
| Boardmail an "ledzep" |
Wertpapier: BC Molly |
montag..up gap..
20% gewinn...und wieder kaufen..
Optionen
| Boardmail an "eula" |
Wertpapier: BC Molly |
bid 1,22
ask 1,28
Denke hier geht wieder schnell die Luft raus, man sollte Gewinne schnell mitnehmen, bevor es wieder runtergeht!
wenn der kurs über 5,00 steht .. macht den gewinn auch nicht viel größer .. nur etwas ..
man solte es nie bis zum letzten ausreizen ...
dadurch sind mir schon oft gute aktien am A**** vorbeigegangen .... mit dem abwarten abwarten .. geht noch tiefer .. und dann .. ab nach oben