Tenajon Resources - News!
Seite 1 von 4 Neuester Beitrag: 16.12.08 19:43 | ||||
| Eröffnet am: | 18.12.06 22:16 | von: Nukem | Anzahl Beiträge: | 80 |
| Neuester Beitrag: | 16.12.08 19:43 | von: Chalifmann3 | Leser gesamt: | 11.580 |
| Forum: | Hot-Stocks | Leser heute: | 15 | |
| Bewertet mit: |  | |||
| Seite: < | 2 | 3 | 4 > | ||||
Wkn: 882552
Kanada/Berlin
News von Tenajon.
http://www.stockhouse.com/news/news.asp?newsid=4850646&tick=TJS
Tenajon Resources Corp.: Ajax Molybdenum Deposit Extended 500m Vertically, Results Include 145m of 0.064% Molybdenum Including 12.57m at 0.107% Mo
12/18/2006
Tenajon Resources Corp.: Ajax Molybdenum Deposit Extended 500m Vertically, Results Include 145m of 0.064% Molybdenum Including 12.57m at 0.107% Mo
12/18/2006
VANCOUVER, BRITISH COLUMBIA, Dec 18, 2006 (CCNMatthews via COMTEX News Network) --
Tenajon Resources Corp. (TSX VENTURE:TJS) (the "Company") today announced that it has received the remaining assay results from the 2006 deep drilling program on its 100% owned Ajax Molybdenum Property located 13 km north of Alice Arm, BC. Results from the deepest hole drilled in the 2006 program (DDH06-06) include 145.83m at 0.064% Mo, including 12.57m at 0.107% Mo. This hole bottomed in mineralization with the final 7.62m assaying 0.099% Mo, extending the known mineralization over 500m below the pre-2006 drilling and doubling the vertical extent of the deposit.
The 2006 drill program was designed to expand the currently defined Inferred Mineral Resource of 345 million tonnes at 0.070% Mo (0.117% MoS2) to depth, and to test for higher grade mineralized zones along the flanks of the system.
The Ajax Molybdenum deposit occupies a surface area approximately 650m by 600m and this summer's drilling has extended the depth of the zone from surface to depths of over 1 kilometer, and remains open at depth. The mineralized system includes several areas of higher grade mineralization and these areas in the upper portion of the deposit are generally structurally controlled by the faulting that occurred during the formation of the deposit. Similar structures were also witnessed in the recent drill program where the holes typically intersect several higher grade zones. With the additional information gained from this program, Tenajon will be able to better target and define areas of higher grade mineralization, as it advances the Ajax project to the next phase of definition drilling. The details of the final three drillholes are discussed below.
Drillhole DDH06-04 was drilled at a dip of -63 degrees, from the same setup as drillhole DDH06-01(-47 dip). The drillhole was terminated at a depth of 449.59m due to drilling difficulties. This hole only intersected the eastern arm of the deposit at approximately 200m below historic drilling.
Drillholes DDH06-05 and DDH06-06 were drilled at dips of -65 and -73 degrees respectively, from the same location as drillhole DDH06-03 (-57 dip). Both holes ended within the mineralized porphyry system, at the drilling capacity of the available rig, over 500 metres below any historic drilling. Please see the attached diagram for 2006 drill hole location map (http://www.ccnmatthews.com/docs/TJS.jpg).
Results for all of the drill holes at Ajax, including those previously released are summarized below:
--------------------------------------------------
Hole From To Length Mo%
(m) (m) (m)
--------------------------------------------------
--------------------------------------------------
DDH06-01(i) 312.42 364.24 51.82 0.062
--------------------------------------------------
including 333.4 352.04 18.64 0.081
--------------------------------------------------
--------------------------------------------------
DDH06-03(i) 340.77 352.96 12.19 0.068
--------------------------------------------------
AND 418.7 511.67 92.97 0.065
--------------------------------------------------
including 465.73 480.97 15.24 0.083
--------------------------------------------------
AND 523.40 669.95 146.55 0.073
--------------------------------------------------
including 523.40 562.80 39.4 0.095
--------------------------------------------------
--------------------------------------------------
DDH06-04 349.00 443.90 94.90 0.065
--------------------------------------------------
including 373.38 385.57 12.19 0.086
--------------------------------------------------
also including 422.15 443.90 21.75 0.086
--------------------------------------------------
--------------------------------------------------
DDH06-05 346.86 583.69 236.83 0.057
--------------------------------------------------
including 558.78 562.95 4.17 0.119
--------------------------------------------------
also including 575.31 583.69 8.38 0.100
--------------------------------------------------
AND 702.09 780.22 78.13 0.057
--------------------------------------------------
including 758.34 765.53 7.19 0.089
--------------------------------------------------
--------------------------------------------------
DDH06-06 614.04 759.87 145.83 0.064
--------------------------------------------------
including 629.95 642.52 12.57 0.107
--------------------------------------------------
also including 676.05 685.19 9.14 0.082
--------------------------------------------------
also including 706.53 719.42 12.89 0.072
--------------------------------------------------
also including 752.25 759.87 7.62 0.099
--------------------------------------------------
(i) previously released drill hole
Tenajon is currently in the process of data compilation and modeling of the deposit, in preparation for updating the resource estimate.
A preliminary route survey has been completed to reestablish road access to the deposit. In addition, preliminary environmental baseline sampling and metallurgical testing are ongoing.
Ali Shahkar, P. Eng., who is a Qualified Person as defined by NI 43-101, supervised the Ajax Property exploration program. Drill core was sawn in half by company personnel and delivered to Acme Analytical Labs (in Vancouver) for assaying, using their 7TD package (4-acid digestion followed by analysis by ICP-ES). A check sampling program using standards, blanks and duplicates is utilized by the Company.
On Behalf of the Board of Directors
TENAJON RESOURCES CORP.
D. Bruce McLeod, President
This news release may contain forward looking statements which are not historical facts, such as ore reserve estimates, anticipated production or results, sales, revenues, costs, or discussions of goals and exploration results, and involves a number of risks and uncertainties that could cause actual results to differ materially from those projected. These risks and uncertainties include, but are not limited to, metal price volatility, volatility of metals production, project development, ore reserve estimates, future anticipated reserves and cost engineering estimate risks, geological factors and exploration results. See the Company's filings for a more detailed discussion of factors that may impact expected results.
SOURCE: Tenajon Resources Corp.
Tenajon Resources Corp. D. Bruce McLeod President (604) 687-7545 or Toll Free: 1-888-338-2200 (604) 689-5041 (FAX) Email: info@northair.com Website: www.tenajon.com
Dies ist keine Kauf oder Verkaufsempfehlung. Aktien können steigen oder fallen. In manchen fällen ist ein Totalverlust möglich.
IRW-Press: PINNACLE MINES: Pinnacle Mines: Hochwertigere Ergebnisse im Silver Coin Gebiet
Hochwertigere Ergebnisse im Silver Coin Gebiet für die Bohrungen 114, 132 und 158 mit 30,65 g/t, 23,14 g/t und 44,1 g/t Gold
Stewart, BC Pinnacle Mines Ltd., Mountain Boy Minerals Ltd. und Tenajon Resources Corp. geben bekannt, dass sie mehr Proben vom Erkundungsprogramm 2006 erhalten haben und dass mehrere Bohrungen in der Main-Breccia-Zone im Silver Coin Gebiet und im Kansasgebiet auf hochwertigeres Gold und Silber gestoßen sind. Silver Coin ist ein Gold-Silber-Gebiet, das sich ca. 24 km nördlich von Stewart, British Columbia, in dem Skeena Abbaugebiet befindet.
Angehängte Grafik:
tjs.gif (verkleinert auf 78%)
tjs.gif (verkleinert auf 78%)
Angehängte Grafik:
tjsII.gif (verkleinert auf 78%)
tjsII.gif (verkleinert auf 78%)
Angehängte Grafik:
tjsIII.gif
tjsIII.gif
Siehe: http://www.stockhouse.ca/...w=&Displaycurrency=&symbol=TJS&table=LIST
http://www.tenajon.com/
Einfach mal anschauen
Marktkapitalisierung unter 30 Mio$ !!!
Show Financial Table(s)
Show All
Tenajon Announces 2007 Ajax Molybdenum Drill Plans
Near Surface Higher Grade Zones to be Targeted
VANCOUVER, BRITISH COLUMBIA--(CCNMatthews - April 3, 2007) - Tenajon Resources Corp. (TSX VENTURE:TJS) (the "Company") is pleased to announce the first phase drill program has been formulated for its 100% owned Ajax Molybdenum Deposit. The program, consisting of 3,500 metres of diamond drilling, is expected to commence in June. The purpose of the program is to further define near surface high-grade mineralized zones within a potential starter pit.
Ajax, one of North America\'s largest undeveloped molybdenum deposits, is located 14 km north of Alice Arm in northwestern British Columbia. Infrastructure in the area is very good with both tidewater access and hydro electric power situated at Kitsault 16km to the south. At a 0.040% Mo cut-off, the Ajax Deposit hosts an inferred mineral resource of 448.8 million tonnes grading 0.063% Mo (623.4 million pounds) and an indicated mineral resource of 38.8 million tonnes grading 0.064% Mo (56.4 million pounds). This resource estimate was prepared by Giroux Consultants Ltd., an independent consulting firm (released March 5, 2007). The current price for molybdenum is approximately US$30.25/lb.
A recent study by geological consultant Dr. N.C. Carter, P. Eng., was used to assist planning for the first phase of the 2007 drill program. Dr. Carter, one of Canada\'s foremost experts on porphyry molybdenum deposits, has extensive experience with BC molybdenum deposits, including; Endako, Alice Arm, Lime Creek (Kitsault), Roundy Creek, Bell Moly, Trout Lake (MAX) and Tidewater. With regards to Ajax Dr. Carter states, "As currently defined, molybdenum grades of 0.05% and greater are contained within a circular zone measuring 650 x 600 metres in diameter, extending from surface at an elevation of about 1050 metres to depths of more than 1000 metres as indicated by the 2006 drilling." He also states, "Previous work on the Ajax Property suggests that areas of enhanced grade may be related to an east-northeast trending fault zone near the northern limits of the currently defined molybdenum zone." This concept, according to Carter, was originally proposed by Newmont geologists in 1966. Furthermore, he concludes, "Most of the holes completed on the Ajax Property have been inclined holes drilled on west-southwest azimuths or essentially parallel to zones thought to contain enhanced molybdenum grades. A review of the drilling results to date suggests that intervals of better molybdenum grades are contained in holes drilled within 100 metres of the east-northeast fault zone." Some results from drilling proximal to this structure include:
--------------------------------------------------Hole From To Int (Feet) MoS2 Mo(i)--------------------------------------------------65-02 35.4 127.4 92.0 0.181 0.109--------------------------------------------------66-19 0 42.7 42.7 0.184 0.110--------------------------------------------------05-03 0 68.6 68.6 0.143 0.086--------------------------------------------------05-02 0 287.8 287.7 0.143 0.086--------------------------------------------------66-30 4.3 73.2 68.9 0.154 0.092--------------------------------------------------(i) Mo grades are 60% of MoS2 grades
He concludes that, "This structure has not been adequately tested," and has recommended six holes test this "potential zone of enhanced Mo grades." In addition, infill drilling is to be completed between some of the holes listed above with the goal of further converting resources from the inferred to the measured and indicated category.
The proposed drilling occurs within a conceptual starter pit area within the boundaries of the deposit which if the drilling program is successful would incorporate approximately 37 million tonnes of the deposit at a 2.33:1 stripping ratio.
Dave Visagie, P. Geo., a Qualified Person as defined by NI 43-101, will supervise the Ajax exploration program.
On Behalf of the Board of Directors
TENAJON RESOURCES CORP.
D. Bruce McLeod, President
This news release may contain forward looking statements which are not historical facts, such as ore reserve estimates, anticipated production or results, sales, revenues, costs, or discussions of goals and exploration results, and involves a number of risks and uncertainties that could cause actual results to differ materially from those projected. These risks and uncertainties include, but are not limited to, metal price volatility, volatility of metals production, project development, ore reserve estimates, Future anticipated reserves and cost engineering estimate risks, geological factors and exploration results. See the Company\'s filings for a more detailed discussion of factors that may impact expected results.
The TSX Venture Exchange has not reviewed and does not accept responsibility for the adequacy or accuracy of this press release.
Go TJS Go !!
Der Gehalt an der Oberfläche ist beachtlich
Tenajon plans to drill 10,000 feet at Moly Brook
2007-05-29 09:36 ET - News Release
Mr. D. Bruce McLeod reports
TENAJON RESOURCES CORP.: MOLY BROOK COMPILATION COMPLETE
Tenajon Resources Corp. has completed data compilation of the Moly Brook property. The review of all available information has confirmed the company's initial impression that the Moly Brook property has excellent potential to host a significant porphyry-style molybdenum deposit. An initial summer drill program consisting of prospecting, mapping, geophysical surveying and a minimum of 10,000 feet of diamond drilling has been proposed to evaluate the property.
The Moly Brook property is located 2.5 kilometres from the hamlet of Grey River on the south coast of Newfoundland, less than four km from a deepwater, ice-free, navigable fjord. Previous exploration completed in 1995 and 1996 by Royal Oak Mines outlined a 450- by 1,100-metre area hosting molybdenite and chalcopyrite in outcrop. Soil geochemistry identified a 50-part-per-million (ppm) Mo in soil contour outlining an up to 500-metre-wide by 1,200-metre-long and open anomaly that is coincidental with the observed mineralization. Eleven of the 46 sites comprising the anomaly returned values of greater than the detection limit of 220 ppm molybdenum. In the northern third of the anomaly a copper-in-soil copper anomaly occurs with the maximum value being 570 ppm. In addition to the molybdenum/copper anomalies, highly anomalous tungsten values of up to a maximum of 440 ppm occur partially coincidental and peripheral to the southern two-thirds of the molybdenum anomaly.
The remainder is available to Stockwatch subscribers.
Optionen
| Boardmail an "Röttgen" |
Wertpapier: Tenajon Resources Class |
VG Unikat
08:30 EST Thursday, January 03, 2008
VANCOUVER, BRITISH COLUMBIA--(Marketwire - Jan. 3, 2008) - Tenajon Resources Corp. (TSX VENTURE:TJS) (the "Company") is pleased to announce that assay results have been received for Hole MB 07-3 from the recently completed 12 hole drill program at its Moly Brook Property located on the south coast of Newfoundland. Hole MB 07-3 intersected a 207.26 metre section averaging 0.084% molybdenum (0.140 MoS2) including a 67.06 metre intercept averaging 0.138% molybdenum (0.230 MoS2). The hole extends the eastern high grade portion of the Moly Brook Zone to a depth of 150 metres below surface with the zone open along strike and down dip. To date, assay data for three drill holes have been reported and the results of nine drill holes are pending.
"Results from the first drill holes have successfully tested a section of the Moly Brook deposit over both width and depth with the zone demonstrating excellent continuity. Results show that Moly Brook has the potential to host a significant bulk tonnage molybdenum deposit. In addition, both current and historic drilling indicate that molybdenum mineralization occurs near surface with very little overburden," said Bruce McLeod, President & CEO of Tenajon. Mr. McLeod adds, "Moly Brook also benefits from being located in a mining friendly district with very good nearby infrastructure including being situated 2.5 km from the Hamlet of Grey River, less than 4 kilometres from a deep water, ice free navigable fjord on the southern coast of Newfoundland."
In 2007, Tenajon completed twelve holes totaling 3,633 metres in length at Moly Brook. The holes tested the target zone over 750 metres of strike length. Hole MB 07-2 successfully tested the up dip extension of the mineralization in Royal Oak hole 95-01 and the along strike extension to that in Royal Oak hole 95-04. Results included a 373.08 metre intercept averaging 0.066% Mo. Within this intercept there is a 109.73 metre section averaging 0.097% Mo, corresponding with the western high grade portion of the Moly Brook Zone, and a 21.34 metre section averaging 0.133% Mo occurring in the eastern half. Hole MB 07-3 tested the eastern half of the Moly Brook Zone approximately 75 metres below Royal Oak hole 95-01. Due to the limited depth capacity of the drill, the western portion of the Moly Brook Zone as intersected in Hole MB 07-2 could not be tested at depth. Hole MB 07-3 intersected similar style mineralization with the intersections being wider and higher grade than those in holes MB 07-2 and Royal Oak hole 95-01. The results for hole MB 07-3 are summarized below, while additional assay results for the recently completed drill program are attached.
--------------------------------------------------
Length From To Interval Mo MoS2
Hole (metres) (metres) (metres) (metres) (%) (%)
--------------------------------------------------
MB 07-3 315.16 107.90 315.16 207.26 0.084 0.140
--------------------------------------------------
Incl. 132.28 244.15 111.87 0.108 0.180
--------------------------------------------------
or 150.57 217.63 67.06 0.138 0.230
--------------------------------------------------
Hole MB 07-3 demonstrates that mineralization intersected in Royal Oak hole 95-01 can be traced from surface to in excess of 150 metres below surface with the zone being open in all directions. Overall there is a good correlation of results between Royal Oak hole 95-01 (204.81 metres of 0.061% Mo - non 43-101 compliant) and MB 07-2 (109.73m of 0.097% Mo). For current drill hole locations along with a detailed cross section, please view the accompanying maps:
To view maps please click on the following link: http://www.ccnmatthews.com/docs/TJS0103.pdf
At the Moly Brook Property molybdenite occurs primarily along the rims of a series of north trending, subvertical sheeted veins and fracture faces over a 450 x 1,100 metre area. On occasion quartz vein stockwork is formed with molybdenite occurring in all of the vein orientations. Molybdenite also occurs as disseminations within the intrusion. The style of mineralization appears to be similar to that at Thompson Creek Metal's Endako Mine in British Columbia where the majority of molybdenite occurs within a sheeted vein and fracture system. Soil sample results, using the 25 ppm Mo in soil contour, outlines a 1,200 metre long and up to 700 metre wide anomaly. Coincidental with the soil anomaly is a 1,500 metre long and up to 800 metre wide zone of high chargeability, as defined by I.P. surveying.
The work at Moly Brook was completed by GeoScott Exploration Consultants under the supervision of Dave Visagie, P. Geo., a Qualified Person as defined by NI 43-101.
At Moly Brook, drill core is sawn into halves with one half being sent for analysis and the other kept for future reference. All samples are prepared at Eastern Analytical using a 600 gram split with the resultant pulp being analyzed at Acme Analytical Labs using a 4 acid digestion with analysis by Inductively Coupled Plasma Mass Spectrometry (ICP-MS). A stringent program of check, blank and duplicate sampling is employed throughout with duplicates, standards and blanks being entered into the sample stream at regular intervals.
On Behalf of the Board of Directors
TENAJON RESOURCES CORP.
D. Bruce McLeod, President
This news release may contain forward looking statements which are not historical facts, such as ore reserve estimates, anticipated production or results, sales, revenues, costs, or discussions of goals and exploration results, and involves a number of risks and uncertainties that could cause actual results to differ materially from those projected. These risks and uncertainties include, but are not limited to, metal price volatility, volatility of metals production, project development, ore reserve estimates, future anticipated reserves and cost engineering estimate risks, geological factors and exploration results. See the Company's filings for a more detailed discussion of factors that may impact expected results.
2007 Moly Brook Drill Results
To accompany Tenajon Resources News Release Dated January 3, 2008
--------------------------------------------------
From To Interval Mo MoS2
Hole (metres) (metres) (metres) (%) (%)
--------------------------------------------------
MB 07-1 4.27 7.32 3.05 0.037 0.062
--------------------------------------------------
and 46.93 62.17 15.24 0.029 0.048
--------------------------------------------------
and 119.48 123.13 3.65 0.048 0.080
--------------------------------------------------
--------------------------------------------------
MB 07-2 18.89 391.97 373.08 0.066 0.110
--------------------------------------------------
Incl. 18.89 40.23 21.34 0.134 0.227
--------------------------------------------------
and 226.16 335.89 109.73 0.097 0.162
--------------------------------------------------
or 182.58 391.97 209.39 0.077 0.128
--------------------------------------------------
--------------------------------------------------
MB 07-3 107.90 315.16 207.26 0.084 0.140
--------------------------------------------------
Incl. 132.28 244.15 111.87 0.108 0.180
--------------------------------------------------
or 150.57 217.63 67.06 0.138 0.230
--------------------------------------------------
Length From To Int Mo MoS2
Hole (metres) (metres) (metres) (metres) (%) (%)
--------------------------------------------------
2007-10 186.84 5.59 127.10 121.51 0.075 0.125
--------------------------------------------------
Incl. 12.80 82.18 69.38 0.099 0.165
--------------------------------------------------
or 12.80 64.11 51.31 0.118 0.196
--------------------------------------------------
or 15.01 56.67 41.66 0.126 0.210
--------------------------------------------------
--------------------------------------------------
2007-11 118.57 20.76 58.97 38.21 0.019 0.032
--------------------------------------------------
75.78 88.09 12.31 0.015 0.025
Leider ist das Ergebnis nur bei Loch 10 sehr gut. Aber Loch 11 lag ohnehin außerhalb der geplanten Tagebaumine. In tieferen LAgen kann durchaus noch mehr vorhanden sein.
hier sieht man schön, dass eine Tenajon mit nur 0,05 $ pro Pfund Moly bewertet ist, und eine Adanac, obwohl sie genau die gleichen Grades hat schon mit 0,34 $ pro Pfund.
Der Schlusskurs in Canada von 0,48 CAN-Dollar entspricht 0,33 Euro.
Tenajon (WKN 882552) hat sich auf die Exploration von Molybdän-Vorkommen spezialisiert hat, und kann hier schon beachtliche Erfolge vorweisen. Es existiert bereits eine Ressourcenschätzung nach NI-43-101 über mehr als 600 Millionen Pfund Molybdän (chem. Zeichen Mo).
Derzeit notiert das Pfund Molybdän bei 33 US-Dollar. Multipliziert mit den 600 Mio. Pfund ergibt das einen gigantischen Wert der Bodenschätze von 19.800.000.000 US-Dollar oder 19,8 Milliarden US-Dollar. In dieses Ergebnis sind die neuesten Funde noch garnicht mit eingerechnet. Und jeden Dollar den der Molybdän-Preis weiter steigt, werden auch die Reserven 600 Millionen Dollar mehr wert!!
Die Börsenbewertung dazu ist dagegen wirklich spöttisch: Derzeit ist Tenajon Resources an der Börse ca. 26 Millionen Dollar wert, fair bewertet wäre sie bei 1-2 Milliarden Dollar (je nachdem wieviel Molybdän bestätigt wird - Experten gehen aber von viel mehr aus, als jetzt schon bekannt ist!).
Also nochmal zum mitschreiben: Tenajon Resources ist derzeit mit 26 Mio. Dollar an der Börse bewertet (Market Cap) und hat bestätigte Reserven im Boden die derzeit 19,8 Milliarden Dollar wert sind. Kurz: Der Wert der Bodenschätze übersteigen die gesamte Firmenbewertung um mehr als das das 600 - fache!!
Für viele mag sich das zwar reisserisch oder marktschreierisch anhören, doch so sind nun mal die belegbaren Fakten.
Angehängte Grafik:
bc_moly_company_comparisons.jpg (verkleinert auf 72%)
bc_moly_company_comparisons.jpg (verkleinert auf 72%)
.){kind=link}
0,53 CAD = 0,3655
Schaut sehr gut aus!!
Nächste Woche soll es einen ausführlichen Bericht von stockreport.de zu Tenajon Resources geben!
Conclusion: How much will Chinalco pay for Tenajon resources when the 679 million pounds ($20 billion+ so in comparision to NOC=$300 million minimum=$5+ share price) of inferred resources only at Ajax will be upgraded to the indicated category? I must admit CAD 27 million, the current market cap seems to be a bit too low, doesn't it? And NOC has not completed the feasibility study yet. So instead of fearing the share price to drop by 1 cent on 10K shares on Monday, simply set an alert if you like, save nerves and time. I would set the alert to $3.00 so you have enough time to log on to see the move above $3.50 when it happens. (PS: Don't forget that the $5 share price would cover only Ajax, but TJS has additional two promising molybdenum properties which may prove the same amount of indicated resources in the long run + advanced gold prospects close to production, let's also not forget the high grade rhenium as a by-product, so when I posted the other day that I bought and recommended TJS at 28 cts and will not sell prior to $10, I had the whole inventory in my head and was as serious as one could be.)
Hallo leute, habe noch einmal einen Vergleich angestellt zwischen des Uebernahmepreis ($455 millionen) fuer Northern Peru Copper (8.5 milliarden pfunde Kupfer und 220 million pfunden moly= $30 milliarden +) Im vergleich die $20 milliarden (fuer 679 million pfunde nur fuer die Moly im Ajax "Boden"). Darueber hinaus haben wir natuerlich noch zwei weitere moly prospects, die gold projekte und rhenium als extra geschenk. Natuerlich muessen wir die inferred in die indicated resource zone bekommen. Das sollt nicht mehr zu lange dauern. Alles zusammengerechnet $10 innerhalb von 15 Monaten koennte schon hinhauen, $3.50 kurzfristig.Nun falls die Moly preise steigen wegen der Chinesischen Export Verbot, koennten wir wahrscheinlich nochmal dazu addieren. Die andere frage is: TJS' management will produktion starten so schnell wie moeglich um eine Finanzierung so gerng wie moeglich zu halten. offen wir mal fuer das beste. In jedem falle: 50 cts wird sehr schnell zur vergangenheit gehoeren. Peace + Best of luck JK (PS: Mein deutsch ist schon ein wenig rostig nach 14 jahren in den staaten, so ich bitte um geduld mit meinen fehlern)
Auch hier alles NI 43 Konform,und garnicht mal schlecht: Mineral Resource Estimate for the Kansas Claim
(Above a Cutoff Grade of 0.75 g/t Au equivalent)
Class Tonnes Au (g/t) Ag (g/t) Contained Gold (oz) Contained Silver (oz)
M&I 7,225,000 1.532 9.998 355,924 2,322,000
Inferred 10,256,000 2.146 5.572 707,605 1,837,000
P.S.Sollte nicht heute ein update von stockreporter kommen,AtlantisResort ? Bin mal gespannt ... !
MFG
Chalifmann
Optionen
| Boardmail an "Chalifmann3" |
Wertpapier: Tenajon Resources Class |
kein Update, sondern ein ausführlicher Bericht als bei der Depotaufnahme und der kam auch! 7 Seiten PDF zu Tenajon und Molybdän im Allgemeinen.
Ein Börsenbrief hat die Aktie am Freitag zu 0,33 € / 0,48 CA$ ins Musterdepot genommen, und heute einen Bericht darüber an seine Abonnenten verschickt... (www.stockreport.de)
Da der Börsenbrief kostenpflichtig ist, wird es wohl einige Wochen dauern, bis er diese Infos - wenn überhaupt- auch kostenlos zur Verfügung stellt.