Mentor Graphics eine neue Ära beginnt


Seite 1 von 3
Neuester Beitrag: 25.04.21 03:36
Eröffnet am:23.10.09 18:27von: ukkaAnzahl Beiträge:71
Neuester Beitrag:25.04.21 03:36von: JanaqlkaaLeser gesamt:38.689
Forum:Hot-Stocks Leser heute:6
Bewertet mit:


 
Seite: <
| 2 | 3 >  

796 Postings, 8252 Tage ukkaMentor Graphics eine neue Ära beginnt

 
  
    #1
23.10.09 18:27
Mit der Übernahme von Valor Computerized Systems, hat sich Mentor einen starken Partner in punkto Leiterplatten-Design- Herstellung- Managment, an Land gezogen.
Der Kursrückgang von Mentor kann den Valoräktionären nur Recht sein. Damit ist ein Tausch von 2 Valoraktien gegen 1 Mentoraktie immer warscheinlicher, bzw gesicherter.

hallo Urbommel
Ich kannte im Valorthread auch einmal einen Urbommel, bist du mit ihm etwa verwandt ??  

796 Postings, 8252 Tage ukkaCharts

 
  
    #2
1
24.10.09 12:05
Unser erstes großes Ziel ist 7 €, nach der Fusion natürlich erst.
Jetzt darf der Mentorkurs ruhig noch hübsch fallen.  
Angehängte Grafik:
chart_3years_mentorgraphicscorp.png (verkleinert auf 93%) vergrößern
chart_3years_mentorgraphicscorp.png

796 Postings, 8252 Tage ukkaWeitere Betrachtungen

 
  
    #3
1
24.10.09 14:33

der MACD scheint ein negatives Signal zu generieren, also ein Verkaufssignal ?  

Angehängte Grafik:
chart_5years_mentorgraphicscorp.png (verkleinert auf 93%) vergrößern
chart_5years_mentorgraphicscorp.png

796 Postings, 8252 Tage ukkaWochenchart

 
  
    #4
1
31.10.09 12:37
 
Angehängte Grafik:
chart_year1_mentorgraphicscorp.png (verkleinert auf 93%) vergrößern
chart_year1_mentorgraphicscorp.png

796 Postings, 8252 Tage ukkaNeues Kursziel

 
  
    #5
20.03.10 11:09
sollten  16 Dollar sein, Also fast 100% Dort wartet dann ein sehr starker Widerstand auf uns. Zeitfenster - in 12 Monaten  
Angehängte Grafik:
graphics.png (verkleinert auf 93%) vergrößern
graphics.png

796 Postings, 8252 Tage ukkaUns so auf

 
  
    #6
20.03.10 11:19
längerer SIcht mit Kurs 20 Dollar, jetzt wo Valor mit im Boot ist, und seinem stets posetiven Ergebnissen und  mit seinem Produkten, könnte es doch sein. Könnte....  
Angehängte Grafik:
mgph.png (verkleinert auf 93%) vergrößern
mgph.png

404 Postings, 5190 Tage Heiko T.Von der Übernahme

 
  
    #7
22.03.10 01:27
von Valor wird Mentor auf jeden Fall profitieren.Wenn´s in Richtung 9 Dollar geht,ist klar,dass der deal positiv beurteilt wird.Dann sitzt wesentlich mehr drin!

Mentor Graphics Acquires Valor Computerized Systems, Ltd.

WILSONVILLE, OR, Mar. 18, 2010 (Marketwire) --

WILSONVILLE, OR -- (Marketwire) -- 03/18/10 -- Mentor Graphics Corporation (NASDAQ: MENT), the market and technology leader in electronic design automation (EDA) and systems analysis solutions, today announced completion of the acquisition of Valor Computerized Systems, Ltd. for net consideration valued at about $50 million. Mentor paid approximately 5.6 million shares of Mentor stock and $32.5 million in cash. Immediately prior to closing, Valor had cash of approximately $29 million. Valor's revenues for its last reported full year ending December 31, 2008 were approximately $40 million.

Valor products are the world's leading software for printed circuit board (PCB) design for manufacturing (DFM) and manufacturing execution (MES) systems. Valor's solutions target three key segments in the PCB manufacturing market: design of the physical layout of the PCB, fabrication of the bare PCB, and assembly of PCB components. With the acquisition of Valor, Mentor is now positioned as the only EDA supplier to provide the electronics industry with a PCB systems solution from concept through manufacturing.

"Valor's expertise and products in the manufacturing segment are an excellent fit to Mentor's in the PCB design area as together we provide a concept-through-manufacturing design solution to our customers," stated Henry Potts, vice president and general manager of the Systems Design Division of Mentor Graphics. "This acquisition will reinforce our number one position in PCB design while enabling Valor to leverage the strengths of Mentor and accelerate their delivery of differentiated design for manufacturing and manufacturing execution products."

By acquiring Valor, Mentor is the first major EDA vendor to extend its scope into the market for PCB systems manufacturing solutions. This will benefit the electronics industry by enabling electronics companies to finally eliminate the long-standing technical barriers and inefficiencies between the worlds of design and manufacturing. Mentor will be in a unique position to deliver an efficient, bi-directional engineering process between designers, their partners in systems manufacturing, and the product supply chain.

"This is a very exciting opportunity for all of us," said Dan Hoz, former Valor CEO and now general manager of the newly-formed Valor division of Mentor Graphics. "With both companies occupying leading positions in their respective markets, our combined expertise can deliver a breakthrough in operational integration between the world of design and the supply-chain oriented world of manufacturing, for the benefit of the entire electronics industry. We foresee a promising future for Valor as a division of Mentor Graphics."

The development of solutions for the manufacturing market will remain a core activity of the Valor division, reinforcing Valor's and Mentor's long-term commitment to deliver solutions and support to the manufacturing market, as well as powerful integration of design for manufacturing functionality into Mentor and non-Mentor PCB design environments. For more information regarding the acquisition and the go-forward strategy, visit www.mentor.com/valor.

About Mentor Graphics

Mentor Graphics Corporation (NASDAQ: MENT) is a world leader in electronic hardware and software design solutions, providing products, consulting services and award-winning support for the world's most successful electronics and semiconductor companies. Established in 1981, the company reported revenues over the last 12 months of about $800 million and employs approximately 4,425 people worldwide. Corporate headquarters are located at 8005 S.W. Boeckman Road, Wilsonville, Oregon 97070-7777. World Wide Web site: http://www.mentor.com/.

(Mentor Graphics is a registered trademark of Mentor Graphics Corporation. All other company or product names are the registered trademarks or trademarks of their respective owners.)

Add to Digg Bookmark with del.icio.us Add to Newsvine

For more information, please contact:
Larry Toda
Mentor Graphics
503.685.1664
larry_toda@mentor.com

Suzanne Graham
Mentor Graphics
503.685.7789
suzanne_graham@mentor.com


Source: Marketwire (March 18, 2010 - 9:00 AM EDT)

News by QuoteMedia
www.quotemedia.com  

796 Postings, 8252 Tage ukkaHabe heute meinen

 
  
    #8
22.03.10 20:22
Kontostand für die Barabfindung erhalten.
25% plus Soli weil es sich um  eine Dividendenzahlung handelt.
Von wegen 8 Jahre gehalten und steuerfreie Gewinne,  und von wegen nur der Gewinn wird versteuert, das ganze Bare ist mit 25% plus Soli versteuert
Haste was, gibst du was.. den Geldfressern  

1914 Postings, 7009 Tage urbommelHallo

 
  
    #9
26.03.10 16:32
das hat mich auch geärgert, doch hat m. E. die ausländische Kapitalertragssteuer nichts mit unserer Abgeltungssteuer zu tun. Das wäre bei einem inländischen Wert nicht passiert. Mein ganzer Freibetrag ist draufgegangen bzw. hat nicht gereicht, mal sehen was der Steuerberater dazu sagt?
Wir können jetzt nur auf Mentor hoffen, gibt es einen Knick nach unten, setze ich die Barabfindung noch in Mentoraktien um.
Wenn die Börse eine Hausse hat, könnte Mentor wenigstens auf 18 Euro steigen und dann habe ich mein Geld zurück und dann aber Schluss mit Lustig.
gruß urbommel  

796 Postings, 8252 Tage ukkaSeit 2008

 
  
    #10
27.03.10 04:49

gilt in Deutschland die Kapitalertragssteuer auf alle Dividende plus Soli Diese wird sofort und knallhart abgegrifffen, sobld du über deinen Freibetrag kommst Dieser wird zwar vom Betrag abgezogen, aber in meinen Fall mußte ich  über ...zig Eier blechen Und der Witz daran ist, daß man diesen Betrag bei der nächsten Einkopmmenssteuer nicht angeben muß. Der ist und bleibt bezahlt und kann auch nicht Verlusten gegen gerechnet werden. Nun sollte die Mentor - Valor AG dies  endlich wieder richtig stellen, in Form von super Q-Zahlen und meine Warterei auch richtig belohnen, in Form von Kurssprüngen in die richtige Richtung  MfG Ukka

 
Angehängte Grafik:
chart_year_mentorgraphicscorp.png
chart_year_mentorgraphicscorp.png

1914 Postings, 7009 Tage urbommelhallo, Freunde von Mentor

 
  
    #11
30.03.10 12:24
ich habe eben die Barabfindung zum Teil für einen Nachkauf genutzt. Ich habe mich dabei an ukkas Chart orientiert. Wenn der Kurs nach unten durchbricht habe ich halt Pech. Der Trendkanal ist aber in Ordnung und die Volatilität spricht für diesen Titel, wir werden sehen.
Ich bin jetzt finanziell auf dem gleichen Stand wie mit Valor. Wenn sich Mentor nur so wie Valor entwickelt, reicht mir das schon, besser kann es immer werden.
Was den verlorenen Steuerstand (ohne Abgeltungssteuer) betrifft, ist es wirklich Scheiße, die 27 % muss man erst einmal wegstecken.
gruß urbommel  

796 Postings, 8252 Tage ukkahast du

 
  
    #12
30.03.10 12:54
deinen 144 Stücken noch 102 dazu kommen lassen?  

796 Postings, 8252 Tage ukkaIch denke

 
  
    #13
30.03.10 14:20

das im Moment der Kurs keine wirkliche Richtung vorgibt. ich denke mal, das in 3-6 Monaten es mehr Aufschluß darüber geben wird, ob Mentor-Valor ein guter Deal war. Wobei Valor ja mit sehr beständigen schwarzen Zahlen , über Jahre, immer dabei war. Der Vorteil jetzt ist , gegenüber den ehemaligen  Small Cap,  Valor AG damals, das diesmal Mentor mit fast 500 Mill. Marktkapitalisierung am Börsenmarkt die  größere Chancen hat, schneller von Fonds "entdeckt" zu werden, als es für  Valor möglich war, da es für viele Fonds ein absolutes Tabu ist , auf Grund seiner Marktkapitalisierung ( Valor), solche Aktien anfassen zu dürfen.  Also von daher kann man nur auf eine Mentorhype spekulieren, welche dann doch bald eintreffen wird, denn wir sind ja schließlich jetzt investiert.

 

1914 Postings, 7009 Tage urbommelnein ukka

 
  
    #14
30.03.10 16:46
es waren 103, damit komme ich auf 1050 Stücke, vorher hatte ich 3000 Valor. Nebenbei sind noch 350 Kontron abgefallen und immer noch ein bisschen Spielgeld übrig.
Bei Valor hätten wir auf einen Kurs von 6,- warten können, bei Mentor könnten es mal wieder 18,- werden, ich habe das ganz gut analysiert.
Es wird schon werden!
Wisst ihr, was der eine Wert im Depot mit 0,61 Mentor (Spitzen) bedeudet? Ich war schon bei der DB, die wussten weniger als ich.
gruß urbommel  

404 Postings, 5190 Tage Heiko T.Habe die Spitzen

 
  
    #15
01.04.10 00:38
auch noch im Depot.Sollten lt. meiner Bank mit anderen zusammen gefasst werden und sofort verkauft werden.Haben die wahrscheinlich noch nicht auf die Reihe gekriegt.
Sind Deine Mentor bei der Dresdner oder Deutschen Bank?
Grüße  

1914 Postings, 7009 Tage urbommelHeiko

 
  
    #16
01.04.10 11:53
Nur die Barabfindung wurde versteuert!
Wenn deine Valoraktien alt genug waren, sind die umgetauschten Mentoraktien ebenfalls steuerfrei.
Kennt jemand den Kurs der Mentoraktien in Euro zum Umtauschtag?
Ich benötige den Kurs eigentlich nur zur Gewinn- und Verlustrechnung, danke.
Die DB konnte mir nicht den Umtauschkurs in Euro mitteilen. Die Spitzen werden aber noch verwertet bzw. ersatzlos ausgebucht. Wenn ein buchbarer Betrag herauskommt, bekommen wir noch Geld gut geschrieben, sonst nichts.
gruß urbommel  

796 Postings, 8252 Tage ukkaurbommel

 
  
    #17
01.04.10 13:07
Mit den Spitzen bedeutet, daß der "Überhang" von 0,61 Aktien zusammen gefaßt von uns allen, dann verscherbelt wurde zu 5,97... Euro, so daß du nur noch jetzt 947 Mentoraktien glatt hattest.
Das mit den Kurs kannst du dir selber aussuchen, es waren um die 6,03 Euro.... ca, etwa
Und es ist richtig und so von mir auch immer gesagt,  es wurde die gesamte BARABFINDUNG, minus Freibetrag,
zu 25% Kapitalsteueretrag, und davon wiederum ( vom Steuerteil) nochmals  5,5% Solisteuer abgezogen.  

796 Postings, 8252 Tage ukkaCiao urbommel

 
  
    #18
08.04.10 16:01

Nur das du dich nicht wunderst Ich bin mit meinen 5755 Stücken bei 8,20$ ausgestiegen Ich werde mir eine neue Strategie für meine Anlagen aussuchen, aber mache jetzt erst mal eine Pause und werde Aktienfrei nach 15 Jahren sein, da ich auch alles andere verkauft habe. Ich habe einfach keine Lust mehr,  im Moment, immer nur Aktienkursen hinterher zu schauen ! Also alles Gute für die Zukunft, für dich!                                                                                                                                                                                                                                                                                                                                                                                           P.S ich bin übrigens keine Frau, wie du mal vermutet hattest 

MfG Ukka

 

1914 Postings, 7009 Tage urbommelHallo ukka

 
  
    #19
09.04.10 15:45
ich finde das ganz nett von dir, dich hier so ehrlich zu verabschieden, das macht nicht jeder so.
Ich wünsche dir für deine aktienfreie Zeit alles Gute und den richtigen Riecher für den Neubeginn. Mir persönlich ist es auch so ergangen, ich habe in der Hausse begonnen und komme aus dem Rhythmus nicht mehr raus. Wenn man in der Baisse einsteigt, braucht man eigentlich keine Ahnung von Aktien zu haben, Standardwerte kaufen und fünf Jahre warten, fertig!
Alles Gute und tschüß
urbommel  

404 Postings, 5190 Tage Heiko T.Gute Meldung,die 1.

 
  
    #20
09.04.10 21:49
Valor MSS Software Suite for PCB Assembly From Mentor Graphics Wins 2010 Vision Award

LAS VEGAS, NV, Apr. 6, 2010 (Marketwire) --

LAS VEGAS, NV -- (Marketwire) -- 04/06/10 -- APEX 2010 -- Mentor Graphics Corporation (NASDAQ: MENT) today announced that it has received the 2010 Surface Mount Technology (SMT) Vision Award for the Valor® MSS manufacturing systems solution suite for PCB assembly. The company received the award in the category of MES/ERP/PLM/QMS Process Control and Traceability Software. Mentor's Valor Division was formerly Valor Computerized Systems, Ltd. Dan Weitzman, Americas regional business manager for the Valor division, accepted the award at the SMT Vision Awards ceremony on April 5 during APEX 2010, at the Mandalay Bay Resort and Convention Center.

The SMT Vision Awards program, celebrating its 18th year, is an annual event recognizing product excellence in electronics surface mount assembly. Selection of candidates is based on outstanding examples of creative advancements in technology in specific areas chosen by a distinguished panel of industry experts.

"The introduction of the Valor MSS software suite to the market represents a significant step forward for process preparation and manufacturing control in the electronics assembly market," stated Weitzman. "We are pleased to accept this SMT Vision award in recognition of that achievement."

Valor's complete interoperable manufacturing execution suite is an industry-first, designed to integrate solutions that will assist manufacturers in the design, planning, monitoring, control, scheduling, box build, traceability, test and rework processes. The product suite is set to provide a long awaited software solution that encompasses the entire production process, from the receipt of goods into the production inventory locations, through to PCA assembly and test, full system assembly and test, right through to the final packing of the finished goods ready for shipment.

The components of the Valor MSS software suite include:

   * vPlan for complete SMT planning, programming and data management, multi-vendor line balancing, program optimization and process setup documents
   * vManage, for complete SMT/PCB material control, material verification and traceability, and warehouse management, including a unique just-in-time material kitting and delivery module using real-time consumption as part of shop-floor management solutions
   * vCheck, a complete PCB quality management solution with AOI/ICT direct interfaces, enforced WIP tracking, repair loop monitoring and control, paperless factory, including synchronized delivery of detailed work instructions for board and system level assembly, and full quality data collection with a business intelligence infrastructure, enabling Web based dynamic reporting for full system genealogy

For more information on Mentor Graphics® PCB and Valor products, visit the company website at http://www.mentor.com/valor.

About Mentor Graphics
Mentor Graphics Corporation (NASDAQ: MENT) is a world leader in electronic hardware and software design solutions, providing products, consulting services and award-winning support for the world's most successful electronics and semiconductor companies. Established in 1981, the company reported revenues over the last 12 months of about $800 million and employs approximately 4,425 people worldwide. Corporate headquarters are located at 8005 S.W. Boeckman Road, Wilsonville, Oregon 97070-7777. World Wide Web site: http://www.mentor.com/.

(Mentor Graphics and Valor are registered trademarks. All other company or product names are the registered trademarks or trademarks of their respective owners.)

Add to Digg Bookmark with del.icio.us Add to Newsvine

For more information, please contact:
Larry Toda
Mentor Graphics
503.685.1664
larry_toda@mentor.com

Suzanne Graham
Mentor Graphics
503.685.7789
suzanne_graham@mentor.com


Source: Marketwire (April 6, 2010 - 9:00 AM EDT)

News by QuoteMedia
www.quotemedia.com  

404 Postings, 5190 Tage Heiko T.Gute Meldung,die 2.

 
  
    #21
09.04.10 21:51
Valor MSS Software Suite for PCB Assembly From Mentor Graphics Wins New Product Introduction Award
Valor MSS Software Suite for PCB Assembly From Mentor Graphics Wins New Product Introduction Award

LAS VEGAS, NV, Apr. 7, 2010 (Marketwire) --

LAS VEGAS, NV -- (Marketwire) -- 04/07/10 -- APEX 2010 - Mentor Graphics Corporation (NASDAQ: MENT) today announced that it has received the Circuits Assembly New Product Introduction (NPI) Award for the Valor® MSS manufacturing systems solution suite for PCB assembly in the Software-Management category. Mentor's Valor Division was formerly Valor Computerized Systems, Ltd. The award was presented to Dan Weitzman, Americas regional business manager for the Valor division, at the April 6 NPI Awards ceremony during APEX 2010 at the Mandalay Bay Resort and Convention Center.

Premiering in 2008, the New Product Introduction Awards sponsored by Circuits Assembly Magazine is an annual celebration of product excellence in electronics surface mount assembly. Premier products based on the finest examples of creative advancement in technology are chosen by a distinguished panel of industry experts.

"Valor has had a history of introducing innovative products that provide real value and a rapid return on investment for electronics designers and manufacturers," stated Weitzman. "We are pleased to accept this award for our latest suite of software solutions, Valor MSS, and look forward to continuing that tradition of innovation as the Valor Division of Mentor Graphics."

An industry first, Valor's complete interoperable manufacturing execution suite is designed to integrate solutions that will assist manufacturers in the design, planning, monitoring, control, scheduling, box build, traceability, test and rework processes. The product suite is set to provide a long-awaited software solution that encompasses the entire production process, from the receipt of goods into the production inventory locations, through to PCA assembly and test, full system assembly and test, right through to the final packing of the finished goods ready for shipment.

The components of the Valor MSS software suite include:

   * vPlan, for complete SMT planning, programming and data management, multi-vendor line balancing, program optimization and process setup documents
   * vManage, for complete SMT/PCB material control, material verification and traceability, and warehouse management, including a unique just-in-time material kitting and delivery module using real-time consumption as part of shop-floor management solutions
   * vCheck, a complete PCB quality management solution with AOI/ICT direct interfaces, enforced WIP tracking, repair loop monitoring and control, paperless factory -- including synchronized delivery of detailed work instructions for board and system level assembly -- and full-quality data collection with a business intelligence infrastructure, enabling Web-based dynamic reporting for full system genealogy

For more information on Mentor Graphics® PCB and Valor products, visit the company website at www.mentor.com/valor.





Source: Marketwire (April 7, 2010 - 9:00 AM EDT)

News by QuoteMedia
www.quotemedia.com  

404 Postings, 5190 Tage Heiko T.Noch bessere Meldung,die 3.

 
  
    #22
09.04.10 21:54
und die Aktie reagiert gen Norden!!
 
Mentor Graphics Announces FloVENT v8 With New Technology Specifically Targeted at Design Engineers

WILSONVILLE, OR, Apr. 8, 2010 (Marketwire) --

WILSONVILLE, OR -- (Marketwire) -- 04/08/10 -- Mentor Graphics Corporation (NASDAQ: MENT) today announced the release of the FloVENT® v8 solution with significant enhancements in heating, ventilation and air-conditioning (HVAC) model creation, solution performance and results visualization. These enhancements to the already well proven technology of the FloVENT tool enable design engineers of built environments, data centers and clean rooms to quickly set up build scenarios and accurately analyze them for proper cooling, heating, contamination control and ventilation. The result is higher productivity for the designer and the ability to run more "what-if" variants, thus converging on the best design possible.

"With an easy-to-use interface, reliable CFD engine, and advanced features like automatic calculation of Capture Index, the FloVENT solution is our primary tool for developing real-time cooling calculators for our advanced data center design and management software," stated Jim VanGilder, P.E, senior mechanical engineer, American Power Conversion, Inc.

The FloVENT software is a powerful Computational Fluid Dynamics (CFD) product that predicts 3D airflow, heat transfer and contamination distribution in buildings of all types and sizes. The FloVENT tool's fast and easy-to-use menu system is designed specifically for engineers involved in the design and optimization of built environments and HVAC systems. Typical FloVENT applications include atriums, shopping malls, office buildings, telephone exchanges and data centers, theaters, airport terminals, storage facilities and warehouses, passenger comfort in vehicles, air quality and contaminant control in laboratories, research facilities, hospitals and underground car parks. The FloVENT tool enables engineers to minimize energy consumption as well as eliminate airflow problems or hazards early in the design process before building construction or refurbishment begins.

"We found that applying FloVENT airflow modeling technology in the design of our clients' clean rooms has proved beneficial for reduction of capital costs," stated Andy Solbert, design engineer, Advanced Design and Simulation Group at CH2MHill. "As well, this has led to new design innovations such as new concepts for 300mm manufacturing environments."

Major Enhancements

Among the many enhancements in the FloVENT v8 release, three stand out as particularly noteworthy:

   * The "Zoom-In" feature enables a designer to select a region of a model and create a more complex micro-model for that section, including boundary conditions from previous analyses. Then a more detailed study can be performed on that section without carrying the overhead of the full-system level model.
   * An improved radiative exchange factor solver results in up to a 40x improvement in execution times for larger design models. This radically reduces the time required to calculate the effects of radiative heat exchange.
   * A "Cold and Hot Aisle Capture Index"* enables designers to efficiently analyze the cooling performance in data centers containing models of racks, local cooling resources (e.g. perforated floor tiles or local coolers), and local air extracts (e.g., return vents).

Availability

The FloVENT v8 software is available for immediate shipment. For further product information or to watch a free online demo, visit the website at: http://www.mentor.com/products/mechanical/products/flovent.


Source: Marketwire (April 8, 2010 - 9:01 AM EDT)

News by QuoteMedia
www.quotemedia.com  

1914 Postings, 7009 Tage urbommelJa,

 
  
    #23
10.04.10 12:32
sieht wirklich gut aus, könnte sich entwickeln.
gruß urbommel  
Angehängte Grafik:
chart_week_mentorgraphicscorp.jpg (verkleinert auf 93%) vergrößern
chart_week_mentorgraphicscorp.jpg

404 Postings, 5190 Tage Heiko T.Good news

 
  
    #24
1
13.04.10 00:36
gehen weiter!
Kurs 9,09

Mentor Graphics FloEFD Technology Wins 2010 Design News Golden Mousetrap Award for Best Product

WILSONVILLE, OR, Apr. 12, 2010 (Marketwire) --

WILSONVILLE, OR -- (Marketwire) -- 04/12/10 -- Mentor Graphics Corporation (NASDAQ: MENT) today announced that it has received the 2010 Design News Golden Mousetrap Award for Best Product for its FloEFD™ mechanical analysis technology. Mentor's Mechanical Analysis Division (MAD) announced the FloEFD technology (version 9.0) in October 2009, which provides Concurrent CFD (Computational Fluid Dynamics) for rapid virtual prototyping required for fluid flow simulation. The Mentor Graphics FloEFD solution received the best product award for Design Tools - Rapid Prototyping, Materials, Tools and Services.

"Design News congratulates the winners and finalists of the 2010 Golden Mousetrap Awards for the great work they've done to develop new and innovative products for design engineers," stated Jennifer Roy, managing editor of Design News Magazine. "These products, as always, showcase the highly imaginative ways that today's engineers are 'building a better mousetrap,' and we thank them for their contributions."

The Design News Awards Program was established over 20 years ago and recognizes engineering innovation and creativity in product design. This year, the Design News editors received a record number of entries and, based on their expertise in each technology area, painstakingly selected the finalists and Golden Mousetrap winners.

The fast, easy-to-use fluid flow and heat transfer FloEFD software is the first major CFD package to be fully embedded in a range of commercial mechanical CAD (MCAD) software products, including Pro/ENGINEER and CATIA V5. The FloEFD solution enables design engineers to conduct upfront, concurrent CFD analysis throughout the product's lifecycle, using the familiar MCAD interface, thus reducing design times by orders of magnitude compared to traditional methods and products. Concurrent CFD can reduce simulation time by as much as 65 to 75 percent in comparison to traditional CFD tools and enables users to optimize product performance and reliability while reducing physical prototyping and development costs without time or material penalties.

"We are excited that Design News has recognized our FloEFD solution as 'best-in-class' since we believe our product has tremendous impact on eliminating geometry and meshing related sub-processes that have been bottlenecks in CFD adoption," stated Erich Buergel, general manager of Mentor Graphics Mechanical Analysis Division. "Our Concurrent CFD methodology permits rapid virtual prototyping so our customers can realize cost and time savings through productivity and right-to-market success."

For more information on Mentor Graphics Concurrent CFD process, FloEFD technology and other products from Mentor's mechanical analysis division, visit the company website at www.mentor.com/mechanical.

Source: Marketwire (April 12, 2010 - 4:00 PM EDT)

News by QuoteMedia
www.quotemedia.com  

1914 Postings, 7009 Tage urbommelStrohfeuer?

 
  
    #25
13.04.10 11:07
Heiko, deine Meldung allein kann das nicht sein?
Hat Mentor die Übernahme schon verdaut?
Ich traue dem Frieden noch nicht!
gruß urbommel  

Seite: <
| 2 | 3 >  
   Antwort einfügen - nach oben